Foundation Repair Concrete Repairman® We Fix It Right™
Licensed, Bonded and Insured Commercial & Residential Foundation Repair Contractors - ROC# 300512 CR-9
Foundation Repair | Stem Wall Repair | Foundation Inspection | Crack Stitching | Foundation Repair Videos | Anchor Bolts
Call (602) 418-2970
Professional Concrete Resurfacing Contractor – Concrete Repairman LLC
Apache Junction Arizona | Chandler Arizona | Gilbert Arizona | Glendale Arizona | Mesa Arizona | Phoenix Arizona | S
cottsdale Arizona | Tempe Arizona
Concrete Resurfacing is when older concrete is taken away completely and then replaced with new concrete that is poured on it to strengthen it. This procedure makes your concrete look as good as new all over again. However, since it’s a faster and more advanced process than just simply cleaning the floors, it’s also important to correctly prepare your concrete before you use it for Resurfacing. Concrete Resurfacing can be done in one of two ways. You can either float the concrete surface, or you can make it to level and compact with cement. More about concrete repair.
If your concrete surface has cracks, chips, and other damage then you most likely have some serious damage to it. Fortunately, repairing concrete damage isn’t nearly as expensive as it would be if you were to replace your entire concrete surface. The first thing you should do is remove any mildew, stains, or dirt from around your exterior walls and driveway. The reason you want to do this is because these types of staining and damage cause the paint underneath to chip off faster. If there is dirt inside your cracks then take a pickax and loosen and remove all of the dirt; it will loosen up any potential cracking that may be occurring. Local concrete repair contractors.
Once you’ve got your exterior surfaces nice and clean then you’re ready to move on to the next step of concrete resurfacing. This next step consists of making sure your concrete surface is absolutely level. You can do this by placing a broom handle under your street address and then walking around your home on an angle. If you see a slight slope where your street’s address is at then you will need to make your concrete resurfacing steps to even out the area. Even more about concrete repair near me in Arizona.
The next step of resurfacing concrete involves treating the cracks you find in the cracks. Treating cracks is imperative if you want to keep your concrete surface looking new for years to come. Most cracks in concrete are going to be small; however, some larger cracks can become bigger over time because of the moisture that’s responsible for their formation. For smaller cracks use a sealant, and for larger cracks you may want to consider concrete filler.
Now that you have your surface leveled, you can move on to the fun part: concrete resurfacing! While concrete resurfacing isn’t that scary or complicated, there are things you should know before you start. First of all, you have to get rid of all the loose dirt and sand you picked up during your walk around your neighborhood. Secondly, you need to start your grinding, which is done by grinding away at the concrete until you create a smooth surface. Remember that you don’t want to completely remove all of the old concrete; instead, you want to leave a small edge of concrete behind so that you can create a new, even surface.
Once you’ve gotten your surface smooth enough, you’re ready to install your new concrete resurfacing. Once you’ve installed your new concrete resurface, you should immediately give it a good cleaning. This will help keep dirt and water from forming again. If you make sure that your surface stays clean and dry for a few months, you’ll find that DIY resurfacing is the perfect choice for many different commercial flooring needs. You’ll find that you don’t have to replace your concrete for years to come; DIY resurfacing is your best bet for keeping concrete surfaces looking new for a while.
Efflorescence Salt Deposits are white, brittle deposits on stone surfaces, which are often seen beneath the surface of masonry walls. This condition is most noticeable in buildings with stone facades, as these structures are usually free of cement mortar. The deposits on these surfaces are caused by the movement of water, which also contributes to efflorescence. If you notice efflorescence, you may want to investigate the cause and remedy.
A stem wall is an integral part of a house foundation. It is made of steel rebar, which is prone to moisture build up and cracking. Fortunately, James Belville has developed a unique stem wall repair system. You can prevent stem wall spalling by using composite rebar. A professional roofing contractor will offer ideas for fixing your stem wall. Here are some simple steps to fix your stem wall. More about stem wall repair Phoenix AZ.
Observe cracks and spalling on the stem walls of your foundation. These cracks are an early sign that stem walls are failing. Many contractors will patch the stem walls with concrete or paint over the affected area to seal in moisture. In fact, many stem wall repair systems will rust and lose their benefits over time. This means that the investment in a stem wall repair system will not be worth it if the repair system rusts, oxidizes, or corrodes.
Fortunately, spalling damage is easy to repair. The process costs only $28 to $48 per running linear foot and is one of the most affordable methods of foundation repair. The price may vary depending on the amount of waterproofing and painting exterior walls. Regardless of whether you opt for a DIY approach, make sure you allow adequate curing time. If you want to prevent future spalling, follow the steps outlined above.
In many cases, concrete resurfacing is an effective option. This process covers the entire surface of a concrete slab, covering up the irregularities and providing a smooth finish. It can even be incorporated with decorative finishes. The process does not require demolition or replacement. In fact, it is a good option for repairing stem wall spalling, which will prevent it from occurring again in the future. But before you go ahead with it, read up on the steps to fix stem wall spalling.
First, you must identify the cause of stem wall spalling. Spalling is a common result of water damage and is not limited to a single area. This issue can affect the foundation of a building. This can be caused by surface water, or even by grading issues. Ultimately, spalling can compromise the structural integrity of a home. It’s important to find the root cause of stem wall spalling, and re-apply a suitable surface finish. More about foundation repair Phoenix Arizona.
Water damage is the biggest culprit in spalling. Whether it comes from heavy rain, a hose rinse, a pool or an outdoor shower, water can get into the concrete and crack it. Without proper installation, structural overload, or improper mixing of ingredients, spalling can cause serious structural damage. In severe cases, spalling may even cause the entire structure to fall. So, it’s crucial to fix it as soon as possible!
Concrete spalling is a common problem. It usually occurs on patios, driveways, sidewalks, and paths, but it can also happen on garage floors, pool decks, and wet basements. Regardless of where it occurs, spalling is a sign of a larger issue. Fortunately, there are many ways to repair stem wall spalling and make it as safe as possible. A professional repairman can help you with the process.
Chandler AZ | Gilbert AZ | Glendale AZ | Mesa AZ | Phoenix AZ | Scottsdale AZ | Tempe AZ
Tempe Arizona – Scottsdale Arizona – Phoenix Arizona – Mesa Arizona – Gilbert Arizona – Chandler Arizona – Stem Wall Repair – Foundation Repair – Ahwatukee Arizona
YouTube Video Playlist:Foundation Cracks – J-Bolt Anchor Replacement – Foundation Warning Signs – Ahwatukee Foundation Repair – Tempe Foundation Repair – Stem Wall Repair Tempe AZ – Stem Wall Repair Ahwatukee AZ – Concrete Repair – Glendale Foundation Repair – Mesa Foundation Repair – Crack Stitching – Oxidized Rebar – Concrete Crack Repair – Expansive Clay Soil – Foundation Settlement – Stem Wall Repair
For the most part, the best way to fix cracked foundation walls is with a stem wall repair. This procedure involves chipping out the affected area and excavating the dirt to the bottom support footing. While this method can save money in labor costs, it will not stop the oxidization process. It is important to waterproof the repairs after the stem wall repair. Arizona Foundation contractors Chandler Arizona Concrete Repairman LLC.
While stem wall repair methods are effective in resolving the problem temporarily, oxidation will return. Fortunately, there are a number of effective ways to stop the oxidation process. One of these methods is to use an electrical cathodic protection system. These systems are designed for industrial facilities and can cost anywhere from $20,000 to $30,000. Unfortunately, this type of installation is not cost-effective for residential applications. However, if the oxidation problem is too severe for you to tolerate the cost, you may consider this method. More about stem wall repair Chandler Arizona.
The process involves removing the soil that covers the stem wall and replacing it with new dirt. If the area is exposed, rebar should be replaced and ion-blocking epoxy should be applied. Then, the concrete should be patched with a high-grade patch material. If you choose to patch the area with fiber, make sure that the seam is water-proofed before you apply paint or acrylic waterproofing. These steps should be followed by a professional to avoid any problems in the future.
Foundation crack repair Chandler Arizona is a great way to save money while maintaining the structural integrity of your home. A cracked foundation can lead to expensive repairs, but it can also be done yourself. Here’s how. Start by cleaning the surface of the crack. It’s possible that mineral deposits have built up over time due to water leaks. Remove this mineral buildup so that the resin can fully penetrate the crack. Next, drill holes along the base of the crack so that the resin can be injected deep. More about stem wall repair.
The first step in foundation crack repair is to clean the area around the crack. Any paints or coatings that were installed previously must be removed. Ports are placed over the crack with an epoxy adhesive. These are spaced one foot apart. Then, two parts of epoxy are troweled over the area, creating a bridge over the central crack. After the entire area is completely prepared, the foundation repair contractor can install the new port. The final step is to inspect and fix the crack.
To protect the walls, apply a waterproof masonry sealer. Make sure to remove all existing paint and coatings, and make sure that the concrete is porous enough to absorb water. Then, apply a masonry sealant to the patch. Work the sealant into the crack with a large brush or a masonry roller. Do not let it dry. Ensure that the new patch is properly covered with waterproof masonry sealant. More about stem wall repair Chandler Arizona.
Floor Leveling Licensed Concrete Contractors
Dust Free Professional Grinding and Crack Stitching in Arizona.
Dust free grinding professionals remove high spots on floors for wood flooring installers valley wide services. Did you know that wood flooring tolerance is only 1/8″ inch to 1/16″ inch in 6′ to 10′, that isn’t very much tolerance.
Grinding down high spots in floor is not simple, you need heavy equipment, don’t think you can just go to Lowe’s and rent something that will work, it won’t. Diamond grinders use gas power or electric to run the high speed motor to significantly grind down concrete floors for wood flooring not to mention the commercial grade vacuums that you need to suck up all that dust, keeping your homeowners happy. No it isn’t 100% dust free, …. but it is close to it.
Before you find out that the cheap guy you called from Craigslist doesn’t have the tools, took your money and didn’t complete the job, call Concrete Repairman LLC we are licensed, bonded and insured contractors that are in your budget.
Floor Grinding and Leveling for Wood Flooring Wood Flooring Tolerance of 1/8″ per 6′
– Foundation Repairman | Serving the Greater Phoenix Metro Areas Including –
Ahwatukee | Buckeye | Casa Grande | Chandler | Gilbert | Glendale | Goodyear | Mesa
Paradise Valley | Phoenix | Queen Creek | Scottsdale | Sun City | Sun City West | Tempe
Your Foundation Repairman Arizona
Stem Wall Foundation Repair & Inspection
Post Tension Foundation Repair & Inspection
James Belville – (602)418-2970
Foundation Repair Expert – Concrete Repairman®
Concrete Repairman LLC – a fully licensed, bonded and insured foundation repair company serving customers in Phoenix and surrounding areas in Arizona. We have over 30 years of experience installing and repairing home foundation cracks, floor crack structural stitching, floor leveling, stem walls, post tension, monolithic and resurfacing foundation damage for homeowner, and commercial clients in Arizona.
A newly refinished concrete floor can increase the lease value of any commercial building or space you own.
We are professional concrete floor resurfacing experts and on this project in Gilbert Arizona we were able to totally restore the floor in this commercial building.
To properly resurface a floor the entire surface needs to be prep’d. This involves removing / stripping any paint or coating that may have been applied to the floor previously. Once the entire floor is exposed it can be inspected for any signs of damage or cracks. Any cracking that is found is the stitched to prevent further separation and cracking. After the area has been inspected and repaired as need it can now be checked for any un-level spots that may need attention. Floor leveler is then applied prior to sealing the concrete floor.
Once the concrete has been sealed it can now be coated and finished. There are so many options at this stage that produce amazing results. A wide range of colors, textures and finishes can be all be applied to your floor to produce the look you desire or need.
For more information about concrete floor resurfacing, concrete slab stitching, concrete crack repair or floor grinding contact us today.
Grinding down concrete flat to allow for new tile flooring .
Home Depot installers called us to help with there customer’s floor problem before they could install the new tile flooring. I talked with the home owner that afternoon to look at the project. We ground down the floor the very next day, it took 6 hours of dust free grinding . Serving Phoenix, Mesa, Tempe, Scottsdale, Chandler, Ahwatukee Az, in Arizona Call James today. 602-418-2970
– Foundation Repairman | Serving the Greater Phoenix Metro Areas Including –
Ahwatukee | Buckeye | Casa Grande | Chandler | Gilbert | Glendale | Goodyear | Mesa
Paradise Valley | Phoenix | Queen Creek | Scottsdale | Sun City | Sun City West | Tempe
Your Foundation Repairman Arizona
Stem Wall Foundation Repair & Inspection
Post Tension Foundation Repair & Inspection
James Belville – (602)418-2970
Foundation Repair Expert – Concrete Repairman®
Concrete Repairman LLC – a fully licensed, bonded and insured foundation repair company serving customers in Phoenix and surrounding areas in Arizona. We have over 30 years of experience installing and repairing home foundation cracks, floor crack structural stitching, floor leveling, stem walls, post tension, monolithic and resurfacing foundation damage for homeowner, and commercial clients in Arizona.
Concrete Grinding & Floor Leveling in Tucson, Az.
Grinding concrete floors in Tucson is a job for the Concrete Repair Man 602-418-2970, leveling, grinding and patching concrete floors in Arizona for more than 14 years.
Tucson concrete grinding and floor leveling is one of the only ways to fix crack on unlevel floors before carpet, tile and wood flooring. Wood flooring needs concrete floors to be flat, no more than 1/4 slop or rise in a 10 ft. radias.
Floor sometimes need to be ground down to alow for tile and the crack need to be ground down and filled.
Call the ConcreteRepairMan.com for all your concrete grinding and floor leveling needs in Tucson Arizona.
Dust Free Floor Grinding & Leveling Concrete
– Foundation Repairman | Serving the Greater Phoenix Metro Areas Including –
Ahwatukee | Buckeye | Casa Grande | Chandler | Gilbert | Glendale | Goodyear | Mesa
Paradise Valley | Phoenix | Queen Creek | Scottsdale | Sun City | Sun City West | Tempe
Your Foundation Repairman Arizona
Stem Wall Foundation Repair & Inspection
Post Tension Foundation Repair & Inspection
James Belville – (602)418-2970
Foundation Repair Expert – Concrete Repairman®
Concrete Repairman LLC – a fully licensed, bonded and insured foundation repair company serving customers in Phoenix and surrounding areas in Arizona. We have over 30 years of experience installing and repairing home foundation cracks, floor crack structural stitching, floor leveling, stem walls, post tension, monolithic and resurfacing foundation damage for homeowner, and commercial clients in Arizona.