How to Fix Cracks in Foundation Walls Chandler Arizona

For the most part, the best way to fix cracked foundation walls is with a stem wall repair. This procedure involves chipping out the affected area and excavating the dirt to the bottom support footing. While this method can save money in labor costs, it will not stop the oxidization process. It is important to waterproof the repairs after the stem wall repair. Arizona Foundation contractors Chandler Arizona Concrete Repairman LLC.

While stem wall repair methods are effective in resolving the problem temporarily, oxidation will return. Fortunately, there are a number of effective ways to stop the oxidation process. One of these methods is to use an electrical cathodic protection system. These systems are designed for industrial facilities and can cost anywhere from $20,000 to $30,000. Unfortunately, this type of installation is not cost-effective for residential applications. However, if the oxidation problem is too severe for you to tolerate the cost, you may consider this method. More about stem wall repair Chandler Arizona.

The process involves removing the soil that covers the stem wall and replacing it with new dirt. If the area is exposed, rebar should be replaced and ion-blocking epoxy should be applied. Then, the concrete should be patched with a high-grade patch material. If you choose to patch the area with fiber, make sure that the seam is water-proofed before you apply paint or acrylic waterproofing. These steps should be followed by a professional to avoid any problems in the future.

Foundation Crack Repair Chandler AZ

Foundation crack repair Chandler Arizona is a great way to save money while maintaining the structural integrity of your home. A cracked foundation can lead to expensive repairs, but it can also be done yourself. Here’s how. Start by cleaning the surface of the crack. It’s possible that mineral deposits have built up over time due to water leaks. Remove this mineral buildup so that the resin can fully penetrate the crack. Next, drill holes along the base of the crack so that the resin can be injected deep. More about stem wall repair.

The first step in foundation crack repair is to clean the area around the crack. Any paints or coatings that were installed previously must be removed. Ports are placed over the crack with an epoxy adhesive. These are spaced one foot apart. Then, two parts of epoxy are troweled over the area, creating a bridge over the central crack. After the entire area is completely prepared, the foundation repair contractor can install the new port. The final step is to inspect and fix the crack.

To protect the walls, apply a waterproof masonry sealer. Make sure to remove all existing paint and coatings, and make sure that the concrete is porous enough to absorb water. Then, apply a masonry sealant to the patch. Work the sealant into the crack with a large brush or a masonry roller. Do not let it dry. Ensure that the new patch is properly covered with waterproof masonry sealant. More about stem wall repair Chandler Arizona.