Foundation Repair Concrete Repairman® We Fix It Right™

Licensed, Bonded and Insured Commercial & Residential Foundation Repair Contractors - ROC# 300512 CR-9

concrete repair

Gilbert Foundation Repair Stem Wall Repair and Anchor Bolts Replacement

Gilbert Foundation Repair Stem Wall Repair

The Basics of Foundation Repair

Your home’s foundation Gilber AZ is critical for stability. When it starts to settle, it can cause problems like cracked walls and floors and doors that won’t close properly. There are several ways to reestablish support for your foundation. The best option usually depends on the soil composition beneath your house.

Stem Wall Repair

As the name implies, stem wall repair deals with issues like cracks in the foundation. These can be caused by a number of different factors, including soil conditions and changes in temperature. In order to minimize these problems, homeowners should proactively maintain their foundations. This includes regular inspections, waterproofing, and drains.

When cracks occur in a foundation’s stem walls, they need to be addressed right away. If they aren’t, they will worsen over time. The best way to fix this issue is by using carbon fiber and epoxy to reinforce the damaged areas of the foundation.

While there are other ways to address these problems, they won’t be as effective or long-lasting. These methods don’t tackle the root cause of the problem, which is rust induced by chloride ion migration. This is why it’s important to consult a foundation repair company that understands this problem and can offer solutions that are more sustainable.

Foundation Problems

A home foundation repair job is time consuming and expensive. It involves plan development, support installation, and house raising or stabilization. This work also requires a structural engineer’s report. The sooner this work is done, the less costly it will be.

Unless foundation problems are addressed early, they can damage walls, ceilings, windows and doors. They can even cause pipes to leak. Foundation damage can also reduce a home’s real estate value.

There are several indicators that a home’s foundation is in trouble, such as stair step cracks, visible gaps around doors and windows, and sagging floors. Even hairline cracks should be watched, as they could be caused by moisture intrusion. Structural engineers should examine any crack wider than a quarter of an inch. They can recommend a variety of repairs, including steel or concrete piers, mudjacking, and concrete piles. Many of these solutions involve digging underneath the foundation and pumping in a mixture of water and cement, but each option has pros and cons depending on the soil under the house.

Rebar Repair

Foundation repair contractors in Gilbert, Arizona fix a wide range of issues, from horizontal and vertical cracks to rusty and oxidized rebar. Some of these problems require excavation, and if the soil has been compacted or damaged by water, it may be necessary to hire a landscaping company to improve the drainage around the foundation before a contractor can work on it.

The whole point of a foundation is to evenly distribute the load of a home over the soil and support it. When rebar becomes broken it jeopardizes this function by providing easy access for water to the soil underneath, leading to spalling and other structural damage. The rusty rebar is also a source of stress that can lead to bowing walls. To combat rebar rust, we use carbon fiber wraps (a Kevlar-like material that has 15,000 pounds of tensile strength) and epoxy to seal the rust and impede future corrosion. These repairs are generally more expensive than repairing a crack, but they are necessary to keep your home safe and stable.

Anchor Bolt Repair

Anchor bolts are a crucial part of any foundation structure, and they must be properly positioned and sized. A professional structural engineer can recommend the best type of anchor bolt based on the load requirements and concrete PSI. Choosing the right bolt size ensures that it can support the fixture, and that it won’t be subject to stresses caused by a bad placement.

Bent-bar anchor bolts are steel rods that have threads on one end and a bent or bowed end that is inserted into the concrete during installation. These heavy-duty foundation bolts are used to support signposts, shafts, heavy hardware and additional steel structures. They can also be used to secure steel high fences on highways and other public areas. A professional can recommend the correct type of anchor bolt for a specific project, and a skilled technician can install the new anchor bolts in accordance with the manufacturer’s recommended installation methods. Anchor bolts can be repaired using coupling and welding techniques to remove and replace damaged threaded regions caused by corrosion or lateral shear failure.